xBloom Studio Coffee Maker with Grinder, Scale, Three Colors
Guaranteed Safe Checkout
Coffee maker with grinder that grinds, heats and poursOne button press gives you the cup. The machine does the rest.
This machine replaces a burr grinder, a gooseneck kettle, a scale and a dripper with one countertop unit. A 48 mm (1.9 in) conical burr grinder with 80 settings, water heated on demand from 40 to 100°C (104 to 212°F), a spout that moves in center, spiral or circular patterns, and a 0.1 g scale under the drip tray. Tap a roaster's recipe card or dial in your own beans.
- 48 mm (1.9 in) burrs, 80 grind settings
- 40 to 100°C (104-212°F) instant heater
- 0.1 g built-in scale
- Three pour patterns
Before you order: important notice This machine may arrive rated at 220V or 240V and 50Hz or 60Hz, depending on the batch and the specifications available. Completing your order is your explicit acceptance of these specifications and terms. This product cannot be returned or exchanged in any country, because it ships internationally through several countries.
What is inside
The grinder
48 mm (1.9 in) stainless conical burrs, 80 stepped settings, variable 60 to 120 RPM. An ionizer and a sweeper cut static and retention.
The brewer
An instant nanofilm heater brings water to the set temperature on demand. The moving spout pours center, spiral or circular at a controlled flow rate.
The scale
Under the drip tray, 0.1 g accuracy, with its own dial on the front. It weighs the dose, tracks the pour, and doubles as a kitchen scale.
Autopilot, Copilot, Freesolo
Tap the card, press start
Every xPod and recipe card carries an NFC chip with the roaster's recipe: grind size, ratio, temperature, bloom and pour pattern. Tap it on the machine, add beans, press start. About three minutes later the cup is ready.
Your beans, your recipe
Open the app, pick a recipe or write one, and it brews with your own coffee. Every parameter is exposed: grind, dose, ratio, temperature to the degree, bloom time, pour speed, pour pattern.
Use the parts separately
Grinder, hot water and scale each work on their own. Grind for a French press or V60 at the sink. Dispense 200 ml (6.8 oz) at 85°C (185°F) for tea. The magnetic dosing cup fits a 58 mm (2.3 in) portafilter if you pull espresso on a separate machine.
Built for precision
The numbers
This one is for you if
You should buy this if
- You drink pour over and want cafe-quality cups without the ten-minute.
- Your counter has room for one machine, not a grinder, kettle and scale.
- You buy beans from different roasters and want their recipes, not a generic one.
Look elsewhere if
- You want espresso. It grinds fine enough but does not pull shots.
- You brew a full pot for a household. This is a single-cup machine.
Answered plainly
Do I need xPods, or can I use my own beans?
Your own beans work. xPods give you one-tap recipes from the roaster, but the grinder takes any whole bean, and the app lets you write and save recipes for whatever you buy.
Does the coffee maker with grinder work with a V60 or Kalita?
Yes. It ships with the Omni Dripper 2 and accepts Hario V60, Kalita Wave and most standard cone drippers on the brew platform.
How loud is the grinder?
It runs at 60 to 120 RPM and is quieter than most blade grinders. The conical burrs grind slowly. It takes about 20 seconds to grind a single dose.
Can I use the scale without brewing?
Yes. The scale works on its own through Freesolo mode. Weigh a dose, measure water for tea, or use it as a kitchen scale with 0.1 g accuracy.
One machine, three tools
Apple Pay, Visa, Mastercard and installment plans at checkout. More automatic pour over machines and brewing tools in our coffee makers and brewers collection.
