Resin Wood Replacement Portafilter Handle, M10 Thread
Guaranteed Safe Checkout
A resin wood handle for the portafilter you already ownUnscrew the tired grip, thread this one on, and keep your basket and head.
You are buying a single portafilter handle made from resin blended with natural wood, with no head or basket attached. The grip runs 125 mm (4.92 in), weighs about 90 g (3.17 oz) and turns into place on an M10 screw thread. Swap it in when your old grip is worn and the handle is the only one of your espresso machine accessories that needs replacing.
- Screws on with an M10 thread
- About 90 g (3.17 oz) in the hand
- Resin and natural wood blend
- Dark black or marbled white
Handle only, so know what you are getting
Not included
- No filter basket
- No portafilter head or spouts
- No adapter for other thread sizes
Included
- One single handle in your chosen color
- An M10 threaded end that screws into the head
- A 125 mm (4.92 in) grip in resin and wood
Your current portafilter head and basket stay in use. Only the grip changes.
Check your thread before ordering
Unscrew the handle from your portafilter and look at the bolt or socket. This handle uses an M10 thread. If your manual or the old handle lists a different size, it will not screw in, and forcing it can strip the threads.
Pick the grain that suits your counter
Black
Dark resin wood with a deep, low-key look. Sits well next to steel and black machines.
White
Marbled resin wood, so every handle shows its own swirl. A brighter pick for a cream or pastel setup.
Light in the hand
At roughly 90 g (3.17 oz), it adds little weight while you lock in, tamp and knock out the puck.
Is this the right part for you
Order it if
- Your portafilter takes a screw-in handle with an M10 thread
- The old grip is cracked, loose or just plain
- You want a wood look and keep your current basket
Look elsewhere if
- You need a full portafilter, such as our 58mm bottomless portafilter with a wood handle
- Your handle socket uses another thread size
The numbers
Before you swap the handle
Is this a full espresso portafilter or just the handle?
Just the handle. You screw it into the head of an espresso portafilter you already own, and your basket and spouts stay as they are.
Will it fit my portafilter?
It fits a portafilter head that takes an M10 threaded handle. Remove your old grip and check the thread size, or look it up in your machine manual, before you order.
How do I put it on?
Twist the old handle off the head, then turn this one in by hand until it sits snug and points straight. Avoid overtightening so the threads stay clean.
What espresso machine accessories pair well with a wood handle?
A matching tamper keeps the look together. Our wood handle tamper with a ripple base or the Macaron leveler and tamper sit nicely beside it on the counter.
Give your portafilter a new grip
Apple Pay, Visa, Mastercard and installment plans at checkout. Tampers, baskets and other bar gear wait in our barista tools.
