Solid Walnut Espresso Tamper Holder Stand, Fits Up to 58mm
Guaranteed Safe Checkout
A home for your tamper, leveler and puck screenOne walnut block keeps three loose espresso tools upright in one place.
This espresso accessories organizer is a solid black walnut block with two round cutouts, one for a tamper and one for a leveler, each sized for a base no larger than 58 mm (2.28 in). A third, upright slot holds a puck screen. At about 170 x 80 x 29 mm (6.69 x 3.15 x 1.14 in), it fits beside the grinder on a home espresso bar or a working cafe counter.
- Tamper and leveler up to 58 mm
- Upright puck screen slot
- Rubber feet grip the counter
- Solid black walnut body
What goes where
Tamper slot
A round cutout holds the tamper base flat and upright, so the pressing face stays clean and off the counter.
Leveler slot
The second cutout takes your leveler, so both tools stand side by side for the next shot.
Puck screen slot
A narrow vertical slot keeps a puck filter screen on edge, ready to grab by the rim.
Both round slots are rated for tools up to 58 mm in diameter.
Know your tamper's width. The two cutouts stop at 58 mm (2.28 in), and a few precision tampers run slightly wider. Lay a tape measure across the pressing face to confirm yours. For support under the portafilter as you press, pick a station designed for that job instead.
Your counter after a few shots
Tools left loose
- The tamper lies on its side and rolls toward the edge
- Leveler and puck screen end up in different corners
- The tamper face picks up grounds from the counter
Tools in the stand
- Each tool has a fixed spot next to the grinder
- The puck screen stays upright in its own slot
- Rubber pads hold the block still as you lift a tool out
The details
Who it suits
A good pick if you
- Own a 58 mm tamper and a matching leveler
- Use a puck screen and keep misplacing it
- Prefer wood on the bar over plastic or silicone
Look elsewhere if you
- Want a padded spot under the portafilter as you press, which a solid wood tamping mat tray handles
- Use a tamper wider than 58 mm
Before it goes on the bar
Is this a tamping station?
Not in the usual sense. A tamping station holds the portafilter level while you press, while this stand stores your tools between shots. For portafilter support, the IKAPE tamping station adjusts across several basket sizes.
What size tools fit the espresso tamper holder slots?
Any tamper or leveler whose base measures 58 mm or smaller. Narrower bases sit in the cutouts too, since that figure is a ceiling rather than an exact match.
Does the color option change the wood?
No. All three share the same black walnut body. Silver, Dark Green and Black describe the anodized aluminum accent block.
Will a small espresso accessories organizer slide on a stone counter?
The rubber pads on its base are there to stop that. They grip the surface and keep the wood from scratching it.
Give your tools a fixed spot
Apple Pay, Visa, Mastercard and installment plans at checkout. Browse matching tampers and levelers in the coffee accessories collection.
