AIRFLOW Walnut Wood Handle Espresso Tamper, 58.5mm
Guaranteed Safe Checkout
AIRFLOW walnut handle espresso tamperA wide steel face for the full basket, and a warm walnut grip.
This AIRFLOW espresso tamper joins a walnut wood handle to a 58.5 mm stainless steel base, sized for standard 58mm portafilter baskets. You choose a concentric ripple base, a C-corner flat base or both, with dark green or black trim. It is made for the home barista whose current tamper rattles around the basket and never quite reaches the wall.
- Sized for standard 58mm baskets
- Walnut wood handle
- Stainless steel base
- Ripple or flat face
Will it fit your portafilter?
Size decides everything with a tamper, so start there. This base measures 58.5 mm across, a touch wider than the 58mm marked on the basket. That small margin closes the gap at the wall, so grounds near the edge get pressed as firmly as those in the center.
A narrow tamper leaves a soft ring of coffee around the rim, and water slips through that weak spot first. A close fit helps cut down that side channeling and gives you a flatter puck to pull from.
Not for smaller portafilters Plenty of compact home machines ship with baskets narrower than 58mm, and this face cannot enter them. Look for the size stamped on your basket, or on the spec sheet for your machine, and confirm it reads 58mm first.
Pick the face that matches how you tamp
Concentric ripple base
Rings run across the face and press a ripple pattern into the top of the coffee bed. A good choice for anyone who enjoys a textured puck surface.
C-corner flat base
A smooth face with a C-corner edge that leaves a clean, even top. The familiar pick if you learned on a flat tamper.
Concentric plus flat
Both base styles in one option, so you can try each with your own beans and grinder and keep the one you prefer.
Who this tamper suits
A good pick if
- Your machine takes a 58mm portafilter
- Your current tamper wobbles in the basket
- You want wood and steel on the counter, not plastic
Look elsewhere if
- Your basket is smaller than 58mm
- You need a published weight, since the listing gives none
The numbers and materials
Before you choose
What size espresso tamper fits a 58mm portafilter?
A 58.5 mm face like this one. It sits close to the wall of a standard 58mm basket, leaving very little loose coffee at the edge. Smaller baskets will not take it.
Should I choose the concentric or the flat base?
Go flat for a smooth, familiar puck top, or concentric for the ripple face. If you cannot decide, the combined option lets you compare both.
What pairs well with this coffee tamper?
Between shots, the walnut handle can rest in a walnut tamper holder stand that echoes its wood. While you dose, an AIRFLOW magnetic dosing ring helps keep stray grounds off your counter. Pull with an AIRFLOW 58mm bottomless portafilter and you can watch how evenly each shot runs.
How do I look after the walnut handle?
Give the walnut a quick wipe with a soft cloth, slightly moistened if needed, then leave it out to dry in the open air. Keep the wood away from soaking water and rinse only the steel base after a session.
Press the whole basket evenly
Apple Pay, Visa, Mastercard and installment plans at checkout. Browse our barista tools collection for funnels, holders and other tamping gear.
